Télécharger Imprimer la page

iTaste CLK! Manuel D'utilisation page 6

Publicité

Les langues disponibles

Les langues disponibles

SAFETY:
10 second cutoff:
If the activation button is held for 10 seconds or longer, the iTaste CLK! Advanced Personal
Vaporizer will stop firing until the button is released and pressed again.
Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste CLK! Advanced Personal Vaporizer
against shorted atomizers and will stop the unit from functioning in unsafe conditions.
Over-Discharge Protection:
The iTaste CLK! Advanced Personal Vaporizer monitors the battery voltage and will
automatically power off when the battery is discharged.
High compatibility 510 connector:
Threads are compatible with the following clearomizers: iClear16, iClear16B, iClear16D,
iClear30, iClear30B, iClear30s, iClearX.I. and more.
OPERATION GUIDE
7/EN-7
All manuals and user guides at all-guides.com
To POWER ON the iTaste CLK! :
Pressing the power button " " three times in rapid succession will power on the iTaste CLK!
Advanced Personal Vaporizer. The main LED light will blink from red to yellow to green,
after which the iTaste CLK! Advanced Personal Vaporizer will enter standby mode. The final
color of the LED will indicate the current power level.
When the iTaste CLK! Advanced Personal Vaporizer has been powered on, hold the button
down to activate the unit. The color of the LED when the button is pressed indicates the
current power level.
Low Voltage Warning
The Red LED will continue blinking for eight seconds when battery capacity is lower than
3.3V and the iTaste CLK! Advanced Personal Vaporizer will automatically power off.
Battery Capacity Display
The main LED light will display green to indicate full battery charge, yellow to indicate half
capacity and red to indicate immediate charging is required.
8/EN-8

Publicité

loading