Axis Communications 233D Guide D'installation page 3

AXIS 233D Installation Guide
This installation guide provides instructions for installing the AXIS 233D Network Dome
Camera on your network. For all other aspects of using the product, please see the User's
Manual, available on the CD included in this package, or from www.axis.com/techsup
Installation steps
1. Check the package contents against the list
below.
2. Install the hardware. See page 4.
3. Assign an IP address. See page 11.
4. Set the password. See page 14.
Package contents
Item
Network dome camera
Indoor Power Supply with
power cable
Terminal block connectors
Mounting kit
CD
Printed Materials
Before you begin:
If the AXIS 233D is to be mounted in a position where it is difficult to
access, it is recommended that you set the IP address and get the camera up
and running before completing the hardware installation.
AXIS 233D
Installation Guide
Models/variants/notes
AXIS 233D
Europe
UK
Australia
USA/Japan
Korea
3 (8-pin) connector blocks for connecting external devices to the I/O terminal
connectors
Hard Ceiling Mount for Indoor Use
Drop Ceiling Mount for Indoor Use
AXIS Network Video Product CD, including product documentation, installa-
tion tools and other software
AXIS 233D Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws
and regulations.
Page 3