Gewiss Chorus GW 10 756 Mode D'emploi page 20

All manuals and user guides at all-guides.com
Initialization with the Easy base unit
1. Power up the device through the bus.
2. Have the system acquire the device with one of the following procedures:
• Automatic acquisition (the device still has the factory settings):
- select the "Application → New function" or "Application → Edit function" menu
in the Easy base unit: the device will be recognized automatically.
• Manual acquisition (the factory settings have been modified):
- select the "Application → Search device" menu in the Easy base unit;
- briefly press (< 2 seconds) the programming key. The programming LED will light
up during the acquisition process (figure A).
The device acquired by the Easy base unit will be listed, with the number assigned, in the
channels of the "Application → New function" or "Application → Edit function" menus.
Insert the device into a Chorus support, making sure the potentiometer edges are at
the top.
Complete the installation with other Chorus devices or hole covers and fix it to the
relative container (flush-mounted box, wall-mounted box, etc.).
Apply the finish plate.
INSTALLATION
Completing installation
20