Publicité
Liens rapides
MAPLE DRAWER SYSTEM
TOOLS REQUIRED:
#2
7
64
#2
ESTIMATED ASSEMBLY TIME:
20 MIN
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
NOTE:
The maple drawer system
is designed to use either
BLUMOTION 563F5330B
under mount slides or Grass
Elite 7523-19/550/533
undermount slides.
4WTCD-30 & 4WTCD-36 with
BLUMOTION slides require an
additional stabilizer bar which
is included in the kit purchase.
All manuals and user guides at all-guides.com
4WTCD-343FLSC
4VDO
THE MAPLE DRAWER SYSTEM (4WTCD & 4VDO) IS
DESIGNED TO USE UNDER MOUNT FULL-EXTENSION
DRAWER HARDWARE ONLY. IF YOU ARE REPLACING A
DRAWER BOX THAT DOES NOT CURRENTLY USE FULL-
EXTENSION (FX) OR PREMIUM GUIDE (PG) HARDWARE
YOU WILL NEED TO ORDER A DRAWER GUIDE KIT (DGK).
INSTALLATION INSTRUCTIONS: MAPLE DRAWER SYSTEM
4WTCD-18
4WTCD-30
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
JUST ADD
YOUR OWN
DRAWER
FRONT!
4WTCD-18-KCUP
I-4WTCD-0218
Publicité
Manuels Connexes pour Rev-A-Shelf 4VDO
Sommaire des Matières pour Rev-A-Shelf 4VDO
- Page 1 4WTCD-30 & 4WTCD-36 with BLUMOTION slides require an additional stabilizer bar which THE MAPLE DRAWER SYSTEM (4WTCD & 4VDO) IS is included in the kit purchase. DESIGNED TO USE UNDER MOUNT FULL-EXTENSION DRAWER HARDWARE ONLY. IF YOU ARE REPLACING A...
- Page 2 Be careful to not drill through the drawer front. Secure the drawer box to the drawer front with (2) Phillips head screws (See Fig. C-2). Customer Service: 800-626-1126 | rev-a-shelf.com...
- Page 3 All manuals and user guides at all-guides.com STEP 4 If you have 30” or 36” combination drawer box, refer to the Blum lateral stabilizer bar instruction sheet included in the stabilizer bar kit. FIG. D 13/16” STEP 5 (21 mm) NOTE: For frameless application, skip to Step 6.
- Page 4 1/8” by sliding the vertical adjustment lever forward/ backward. Adjust as necessary to ensure the drawer front aligns with the adjacent cabinets. 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 Customer Service: 800-626-1126 | rev-a-shelf.com...
- Page 5 Le système de tiroirs en érable est conçu pour utiliser les lames de montage Blumotion 563F5330B EL SISTEMA DE CAJONES DE ARCE (4WTCD Y 4VDO) ESTÁ DISEÑADO PARA USARSE SOLO DEBAJO DE LOS ou les glissières de montage Grass Elite 7523-19 / 550/533.
- Page 6 # 6 x 1/2 “ (véase Figura B). Installez le déclencheur de libération Blum à droite et à gauche sur le fond du tiroir en utilisant (4) vis à tête cylindrique n° 6 x 1/2 “ (voir figure B). Customer Service: 800-626-1126 | rev-a-shelf.com...
- Page 7 All manuals and user guides at all-guides.com STEP 3 FIG. C-1 Instala los soportes de la Figura 8 en la parte delantera del cajón utilizando los tornillos que vienen dentro de la misma bolsa que los soportes de la Figura 8 (véase Figura C-1).
- Page 8 / vers l’arrière. Effectuez des ajustements si nécéssaire pour vous assurer du bon alignement de la façade du tiroir avec l’armoire. 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 Customer Service: 800-626-1126 | rev-a-shelf.com...