Kindcomfort KT012 Notice D'instruction page 26

5. INSTALLING CHILD SEAT. GROUP 2.
WARNING
Before installing the seat for Group 2, the seat,
harness protectors,
be removed (5.1).
1. Put the seat in position 4 (5.1).
2. Release connectors
the belts thereof. (5.2, 5.3 and 5.4).
3. From the front pull the harness straps towards you to get them out
of the shoulder holes, separate the belt harness protectors (5.5).
4. From the underside of the seat insert part
pull the buckle to remove the entire base (5.6, 5.7 and 5.8).
5. From the underside of the seat pull connectors
remove the harness tapes from the base of the seat (5.6 and 5.9).
6. Lift the cover of the base of the seat, and with a screwdriver
remove the screw and remove the harness adjustment part (5.10),
removing the seat belt, remove connector
with the rest of the harness adjustment tape (5.2).
7. Place the child seat on the vehicle seat, ensuring it is pressed
firmly against the back of the vehicle seat (5.11).
8. Place the child in the child restraint seat (5.12).
9. Move the vehicle safety seat belt through the
vertical guides; make sure the belt is not twisted (5:13).
10. Insert the seat belt in the vehicle anchor point and press until you
hear a "click" so that the child seat is properly installed (5.14).
11. Make sure the vehicle's safety belt is not twisted, also check that
the seat cover does not impede the movement of the vehicle
safety seat belt or prevent the installation of the seat in any way.
To release the child unbuckle the vehicle safety belt as described
in the instructions.
IMPORTANT
Ensure that the belt has no slack.
26 Child restraint system
All manuals and user guides at all-guides.com
Only suitable for Group 2, approx.
4 to 6 years (15-25 Kg.)
H buckle and L harness adjustment button must
O and Q on the back of the seat and remove
G harnesses, C
1 insert in the hole and
2 outwards to
Q from behind the seat
F waist guides and
KT012
B