Kindcomfort KT012 Notice D'instruction page 22

11. Check that the buckle is properly fastened. It is important that in
the event of an emergency the child can be released quickly.
12. Make sure the seat does not become caught by the vehicle´s door
or reclining seat. Likewise, check that the seat is properly and
sufficiently fitted.
13. Never try to remove, change or add pieces to the seat or harness
since their basic and security functions may be seriously affected.
14. Always fasten this safety seat into the vehicle with the seat belt,
even when not in use. Never leave your child unattended when
seated or not.
15. Contact our Customer Service for any question about installing
this child safety seat: +34 943 833 013.
16. Please keep this safety seat away from corrosive products.
17. The manufacturer guarantees the quality of its products but not
the quality of second-hand products or those registered under
other trademarks.
18.The illustrations in this instructions booklet are for information
purposes only. The child restraint may have small differences from
the photographs or images in this instructions manual. These
variations do not affect its approval by ECE Regulation 44/04.
1. USE IN VEHICLES
2-point lap seat belt
Only suitable for this
particular seat WHEN an
airbag is NOT active.
Only suitable for this
particular seat WHEN having
a lap and diagonal seat belt
22 Child restraint system
All manuals and user guides at all-guides.com
3-point lap and
diagonal seat belt
(3 anchor points)
Correct installation /
proper
Incorrect installation /
improper
Optional installation
Optional installation
KT012