Dream On Me CHATHAM Manuel D'utilisation page 7

GLIDER ASSEMBLY - BACK SEAT SETUP
2
2a. Align the Metal Channel on the
Back (B) to the Metal Prongs on
the seat.
2b. Slide the metal channel into the
metal prongs on the seat frame.
2c. Please ensure that the back metal
channel goes into the base metal
prongs until it clicks and locks
itself.
2d. After clicking the back into
position, pull it upward to ensure
that it is fully secured, and then use
the recliner.
www.dreamonme.com/help
(B)
(A)
7