Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Problem
Water drips from the nozzle
when STEAM CARE starts.
Sprayed water is not visible
during STEAM CARE.
Extended time.
If a problem persists, contact a local Samsung service center.
54
English
Untitled-1 54
• This is steam condensation. The dripping water will stop after a short
time.
• Sprayed water is difficult to see when the door is closed.
• Sensor Dry automatically senses the moisture in the load and shuts
the dryer off when the selected dryness level is reached. The drying
time can change according to the type and amount of laundry. See the
cycle chart for reference.
Action
2021-10-20
11:36:49
Publicité
