Alecto DVC-105IP Mode D'emploi page 36

Now go to the settings of your smartphone or tablet and return the Wi-Fi network to
your own network.
Now re-establish the connection with the camera.
Go to the advanced settings to change the password and assign a unique
password to the camera. This is required for secure use of your camera.
2.4 TO REGISTER THE CAMERA TO A SECOND SMARTPHONE OR TABLET.
Method 1:
Press + in the start screen of the AlectoCAM app to add a camera.
Now press LAN Search in the pop-up screen.
You'll then see the UID code of the camera with the IP address. Select this UID
code or the correct code when multiple cameras are connected to the network.
The screen Add Device will open.
Now enter the password of the camera; the default password is "admin".
Please change this password after the camera is registered successfully.
The camera is registered successfully when the image appears.
Now go the camera settings and select Change Password to assign a unique
password to the camera. This is required for secure use of your camera.
Method 2:
Press + in the start screen of the AlectoCAM app to add a camera.
Now press LAN Search in the pop-up screen.
Now press QR Code.
The scanner of the smartphone or tablet (if supported) will be activated.
Now scan the QR Code applied to the camera.
The screen Add camera will open and here you can enter the password of the
camera ("admin").
Now press OK.