Publicité
Les langues disponibles
Les langues disponibles
Do not touch the braking surfaces. Insert the pads one by one into the brake
caliper. Then adjust the brakes as described in the previous paragraph.
Changing the brake cable
If your brake cables are damaged or deteriorated after a long period of use, it is
essential to change them. To do this, follow the steps below.
•
Loosen the screw on the brake caliper.
•
Remove the brake cable from the brake lever.
•
Remove the brake cable from its sheath.
•
Insert a new brake cable into the sheath (contact your retailer for a new
brake cable)
•
Insert the brake cable into the brake lever.
•
Adjust the braking force: see the previous chapter.
Replacing the wheels
80/192
Publicité
