Publicité
Les langues disponibles
Les langues disponibles
Kit Components
The connection kit for activating the factory-installed flood
sensor includes the items shown below. If any item is missing,
speak with your account representative.
For all valve assemblies including the flood sensors compatible
with this kit, refer to ordering code 88009420 (FP-BF-CFS)
at watts.com.
A. Activation module with 8' conductor cable and ground wire
C. 24V Power adapter
Requirements
• Wire stripper
• Suitable location within 8 feet of the flood sensor for
mounting the Cellular Gateway on a wall or structure
• 120VAC, 60Hz, GFI-protected electrical outlet
• Ground wire running from the Cellular Gateway to the
ground point
• Cellular network connection
• Internet browser
B. Cellular Gateway with mounting tabs and screws
When installing an air gap, attach the air gap brackets directly
onto the flood sensor.
2
Publicité
