Publicité
Les langues disponibles
Les langues disponibles
6 MAINTENANCE (cont.)
WARNING: Always unplug the O2+ Source prior to attempting to replace the fuse. Use
only 125 Volt, 2.5 Amp max fuse as a replacement.
6.4 PLUG FUSE REPLACEMENT
The Source comes with a safety fuse built into the plug head, which helps protect the machine
from any power surges. If the fuse is blown and needs replacing, there is a spare already provided
for you on the plug. If the spare is lost or missing, use only a 125 Volt, 2.5 Amp max fuse.
Remove spare
1.
fuse housing with
a small "micro
type" screwdriver
(or similar item).
Lastly, discard
5.
the blown fuse,
close the fuse
compartment,
and replace spare
fuse holder onto
the plug head.
All manuals and user guides at all-guides.com
Separate from the
2.
plug head.
Using the same
3.
small screwdriver,
slide open the
fuse compartment
on the plug head
by pushing away
from the cord.
Use the screwdriver
4.
to pop out the old
fuse and replace
with the spare fuse
provided.
12
Publicité
