Publicité
Les langues disponibles
Les langues disponibles
Operating the oven
Do not to attempt to activate any other program feature except BAKE while
the Sabbath feature is active. ONLY the following key pads will function
correctly with the Sabbath feature on:
CLEAR. All other keys should not be used once the Sabbath feature is
activated.
You can change the oven temperature, but the display will not change
and tones will not sound when a change occurs. (The oven temperature
adjustment feature should be used only on Jewish holidays.) After changing
the temperature while the unit is in Sabbath mode, there is a 15-second
delay before the unit recognizes the change.
You can set the Cook time function before activating the Sabbath feature.
Should you experience a power failure or interruption, the oven will shut off.
When power is returned, the oven will not turn back on automatically. SAb
will be displayed in the oven control display, but the oven will not operate.
Food may be safely removed from the oven while it is still in the Sabbath
mode, however the oven cannot be turned back on until after the Sabbath/
Holidays. After the Sabbath observance, turn OFF the Sabbath mode. Press
and hold both Bake and
for at least 3 seconds simultaneously to turn the
Sabbath mode off. The oven can then be used with all normal functions.
Do not open the oven door or change the oven temperature for about 30
minutes after you have started Sabbath mode to allow the oven to reach the
set temperature. Note that, for best performance, the oven fan operates only
when the oven temperature is rising.
Do not cover the surface cooktop with a blech.
42 English
/
, Bake, START/SET and OFF/
Maintaining your appliance
Steam-cleaning
How to set the oven for steam-cleaning
For light cleaning, the steam-cleaning function saves time and energy.
NOTE
When steam-cleaning, use exactly 10 oz. of water since this produces the best
results.
NOTE
If you press Steam Clean when the oven temperature is above 100˚F, Hot will
appear in the display. Because this function produces the best results when started
while the oven is cool, we recommend that you wait until the oven has cooled
down and Hot disappears from the display.
Remove all accessories from the oven.
1.
2.
Pour approximately 10 oz. (300 ml) of
water onto the bottom of the empty
oven and then close the oven door.
Use normal water only, not distilled
water.
3.
Press Steam Clean.
4.
Press START/SET.
When the operation is complete, the
display will blink and a beep will sound.
Press OFF/CLEAR.
5.
6.
Clean the oven's interior.
There will be a significant amount of
water remaining on the bottom of the
oven after a steam-cleaning cycle.
Remove the residual water with a
sponge or soft dry cloth.
Publicité
