Operating Elements And Displays; Signal Tones - Caso Design Mg25 Menu Mode D'emploi Original

13.2 Operating elements and displays

13.3 Signal tones

The device transmits the following signal sounds as an acoustic feedback signal:
 One signal tone: The device has accepted the entry.
 Two signal tones: The device has not accepted the entry. Check the entry and try
again.
 Four signal tones: The cooking time has ended.
Display panel: Cooking time, output, function display
and actual time are displayed.
Power/sound: Press to set the power level of the
microwave or to switch on/off the sound
Time: Press to set the clock
Weight: Press to set the weight of the food.
Grill: Press to set a grill cooking programme.
Microwave/Grill: Press to select a combination
cooking programm (microwave and grill).
Start: select a cooking programm and let it start later.
Start/Quickstart: Press to start the cooking
programme or to set the Quick Start cooking
programme.
Stop: Press to stop the cooking program (1x) and to
delete all previous settings prior to starting the cooking
procedure (2x).
Time/Menu (control dial): Turn to set the cooking
time or to choose the automatic menu.
56