Publicité
Les langues disponibles
Les langues disponibles
EN
BATTERY
The remote control needs a battery to work.
The remote control can be used at a range of
up to five metres when pointed at the product
(it can normally handle a deviation of 30
degrees).
1.
Open the battery cover.
FIG. 29
2.
Take out the battery holder.
FIG. 30
3.
Insert the battery with the positive
terminal facing up.
FIG. 31
4.
Push the battery holder into the remote
control.
USE
1.
Make sure that the ice packs are frozen.
2.
Put the ice packs in the water container
together with water.
FIG. 32
3.
Plug the plug on the ice cooler into a
power point.
4.
Select the required setting with the
control panel or remote control.
18
MAINTENANCE
NOTE:
Switch off the product and pull out the plug
before cleaning.
•
The filter panel and dust filter must be
cleaned at regular intervals to ensure an
adequate air flow.
•
Clean the product with a cloth moistened
with water and a mild detergent.
Wipe with a cloth or sponge moistened
with water and dry with a dry cloth.
•
Do not use abrasive detergent or petrol,
thinner or other solvents that can damage
the surface of the product.
•
Make sure that no water or other liquid
enters the motor housing or other parts
of the product.
•
To pull the water tank out all the way from
the air cooler, disconnect the pump unit
and water hose by turning the catch 90°
anticlockwise. Carefully pull out the water
tank and clean. Carefully replace the
water tank, connect the pump unit, press
in the water tank and lock in place with
the catch.
Publicité
