König SAS-IPCAM180W1 Manuel De L'utilisateur page 4

SAS-IPCAM180W1 / SAS-IPCAM360W1
IP camera
Description (fig. A and B)
1. Lens
• Use a paper clip to press and hold the button for 5
2. Reset button
seconds to reset the device to the default settings.
• The device is on: The red LED indicator stays on.
• Waiting for Wi-Fi password: The red LED indicator
flashes.
3. LED indicators
• Connecting to the internet: The green LED
(red and green)
indicator stays on.
• The device is in standby mode: The green LED
indicator flashes.
4. Microphone
5. Speaker
6. Memory card slot • Insert the memory card in the memory card slot
(microSD / TransFlash) (storage).
7. USB port • Connect the device to the USB port using the USB
(Micro USB) charger to power the device.
• The IR light switches on automatically to record
8. IR light
videos in the dark.
• The magnet and the metal plate (included)
9. Magnet
enables easy installation.
• When installing vertically, use the "TOP" mark to
10. Direction indicator
install the device in the correct direction.
Use
1. Download and install the app from Apple App Store or Google
Play Store on your mobile device by searching "360Eyes".
2. Insert the memory card in the memory card slot.
3. Power the camera using the USB port and charger.
4. Launch the "360Eyes" app.
5. Create a new account.
6. Connect your smartphone to the preferred Wi-Fi network.
Note: The DHCP in the router must be enabled.
7. Tap the "+" button to add a camera. Wait until the red LED
indicator starts flashing.
8. Enter the Wi-Fi password.
9. Increase the volume of your smartphone and hold it close to the
device to send Wi-Fi instructions to the device.
10. When the device completes receiving the instructions, select
"Next".
11. Wait until the green LED indicator on the device starts flashing
and the device is ready.
Main interface (fig. C)
1. Add camera
2. Camera settings
3. Share camera
4. Delete camera
5. Enable/disable alerts
6. Account and app settings
7. Alerts and alerts settings
8. Local album
9. Cameras
Camera interface (fig. D)
1. Change layout
2. Quality settings
3. Record videos on phone
4. Take photos on phone
5. Mute button
6. Timeline with highlighted recorded history
Technical data
SAS-IPCAM180W1
1/4" progressive scan
Image sensor
CMOS
CPU GM8135S + SC1045
Video resolution 1280 x 720
Video frame rate 25 fps
Video format H.264
Audio input Built-in microphone
Audio format G.766
Remote control Supported
Lens 1.44 mm;185°; fisheye lens
Angle Horizontal 185°
IR-CUT Night vision 10 m
Memory card Maximum 128 GB
TCP/UDP / IP / SMTP / FTP /
Protocol
DHCP / UPNP / NTP
Power 5 V / 1 A
Consumption < 5 W
Temperature 0 °C ~ 60 °C
4
SAS-IPCAM360W1
1/3" progressive scan
CMOS
GM8135 + SC1035
1280 x 960
25 fps
H.264
Built-in microphone
G.711
Supported
1.44 mm; 185°; fisheye lens
Pan 360° top view
Night vision 10 m
Maximum 128 GB
TCP/UDP / IP / SMTP / FTP /
DHCP / UPNP / NTP
5 V / 1 A
< 5 W
0 °C ~ 60 °C