Caratec Vision CAV190P-D Notice D'utilisation page 87

10. Trouble Shooting
Problem
Television set cannot be
turned on
No Picture
No Sound
Poor Picture Quality
Picture too large/small,
distorted.
Blue screen
Television set does not react
to the remote control
DTV/DTB-T mode:
error message "No signal"
PC-Mode:
the picture is too small, too
large, or shifted.
Satellite – no signal
CAV190P-D_Anleitung - 20181214 FIN.indd 87
Action
Make sure that the power cable is properly inserted.
Make sure that the On/Off switch on the bottom of the television set
is turned on.
Make sure that the polarity of the power supply is correct.
Make sure that the correct source (INPUT) is selected.
Make sure that the correct source or antenna is properly connected.
Check the volume setting.
Check whether the Mute function is activated.
Make sure that the antenna cable is properly connected.
Check the picture settings.
Press the ASPECT button of the remote control to change the image
display.
Make sure that the appropriate input (INPUT) is selected.
Make sure that the batteries have been inserted correctly. If necessary,
insert new batteries.
Check the antenna connection.
Re-start the automatic channel search.
Select PC as input source and adjust the picture settings in the menu.
Check the list of channels. In the configuration section of the menu you
can restore the standard list of channels.
87
14.12.2018 09:59:07