Caratec Vision CAV190P-D Notice D'utilisation page 63

5. Main Menu
Funktion
ATV Manual Tuning 1
DVB-C Manual Tuning
DVB-T Manual Tuning
Programme Edit
Signal Information
CI-Information
Dish Setup 2
5V antenna power
1
Input Source DTV // Input Source Satellite
1 2
Smart-D function DiSEqC settings for automatic dish alignment
For the use with a compatible Caratec Smart-D dish.
1. In the Channel Menu select Dish Setup.
2. Select the appropriate setting under DiSEqC 1.1 (see table):
Satellite
HotBird 13E
Astra 19.2E
Eutelsat 5W
Astra 23.5E
It is sufficient to make settings only for the satellites used (e.g. Astra 19.2E und Hotbird 13E).
Automatic Channel Search/Receiver Settings
1.
In the Channels Menu select the automatic channel search function (Auto Tuning).
> The Receiver Settings Menu (Tuning Setup) is displayed.
With Satellite selected as source:
Function
Country
Satellite
Scan Mode
* recommended settings are printed in bold
CAV190P-D_Anleitung - 20181214 FIN.indd 63
Erklärung
Begin manual channel search for the selected source
„ATV Manual Tuning" menus are displayed.
Beginning manual channel search for selected source. „DVB-C Manual
1
Tuning" or „DVB-T Manual Tuning" menus are displayed
1
Organising, deleting, skipping, marking as favourites. „Programme
Edit" menu is displayed.
Show signal information of the station.
Show information on an inserted CI card.
See chapter „6. CI-Modul" on page 29
Erasing, managing, re-setting satellites and transponders.
Menu „Dish Setup" is displayed.
Turning set on with an active antenna in order to feed 5V to the antenna.
Setting Satellite
LNB 1 Turksat 42E
LNB 2 Astra 28.2E
LNB 3 Eutelsat 16E
LNB 4 Eutelsat 9E
Explanation
Set country
Set satellite
 Full*
 Network Scan
Setting Satellite
LNB 5 Astra 4.8E
LNB 6 Thor 0.8W
LNB 7 Amos 4W
LNB 8 Hispasat 30W
Funktion Explanation
All Channels*
Channel Type
 FTA Channels
 All*
Service Type  DTV
 Radio
 weiter auf folgender Seite
Setting
LNB 9
LNB 10
LNB 11
LNB 12
63
14.12.2018 09:59:04