Publicité
Les langues disponibles
Les langues disponibles
EN
5. Hold down these buttons to adjust the
volume.
6. If necessary, use the II/FM button (14)
to pause and restart the playback.
7. To switch off the device, move the
On/Off switch ON OFF to the OFF
position.
Playback Function
1. Insert an SD card into the SD
slot (12), connect a device or storage
medium to the socket USB (16) or pair
an external device via a wireless con-
nection (search for EASY POWER).
2. Slide the On/Off switch ON OFF (10)
to the ON position to switch on the
device.
3. If necessary, press the M button (11)
to switch to wireless connection.
4. Briefly press the Vol-/
or Vol+/
tween the tracks.
5. Hold down these buttons to adjust the
volume.
6. If necessary, use the II/FM button (14)
to pause and restart the playback.
7. To switch off the device, move the
On/Off switch ON OFF to the OFF
position.
Charging External Devices
1. Plug the USB connector of the device
that is to be charged into the socket
5V (6).
2. When the charge control lamp (8) is lit
permanently green, the battery of the
external device is full. Disconnect it.
14
button (13)
button (15) to switch be-
CLEANING AND
STORAGE
Please Note!
■ The device must always be discon-
nected from the power source and / or
the consumers before cleaning it.
■ Do not use any solvents and/or cor-
rosive or abrasive cleaning agents!
These may damage the surface.
•
Keep the device clean. Remove any
dirt with a damp cloth. Then wipe the
device dry.
•
Store the device out of the reach of
children and animals.
•
Store the device in a dry, clean place
that is protected from direct sunlight
and dust and within the temperature
range that is specified in the "Techni-
cal Data" chapter.
•
Charge the battery before storing it for
a lengthy period of time.
•
During a lengthy period of storage,
check the charge status of the battery
approx. every 6 months and recharge
the battery if necessary in order to
prevent a deep discharge.
Publicité
