Publicité
Les langues disponibles
Les langues disponibles
MAINTAINING YOUR H-PURIFIER
IMPORTANT: ALWAYS UNPLUG YOUR APPLIANCE FROM THE POWER SUPPLY WHEN PERFORMING MAINTENANCE TASKS.
FILTER CLEANING / REPLACEMENT
Your H-Purifier will monitor the condition of your filter. A CLEAN FILTER OR REPLACE FILTER alert will appear on the left side of the display
and Flash indicating action is required to clean or change the filter.
Cleaning / Replacing the Filter: [Fig. 15]
•
Remove the Air Inlet Cover from your product. [Fig. 15a]
•
Unlock the Filter release switch. [Fig. 15b]
•
Remove the filter from your product. [Fig. 15c]
•
Use a Vacuum Cleaner to clean the external mesh on the Filter Assembly or Replace with a NEW filter. [Fig. 15d]
•
Re-Fit the Filter assembly into the product. [Fig. 15e]
•
Lock the filter release switch. [Fig. 15f]
•
Refit the Air Inlet Cover to your product. [Fig. 15g]
Plug in your appliance to the power supply and switch on. [Fig. 4]
•
•
Press the INFORMATION button and follow the instructions to reset the Filter Clean function by holding the button for 3 secs, an audible alert
will be heard to indicate a successful reset. [Fig. 7]
Fig. 15
DIFFUSER MAINTENANCE
After each use of the Diffuser function, use a dry soft cloth to clean any residue from the product surfaces.
Diffuser Bottle Replacement: [Fig. 16]
The volume of liquid remaining in the bottle can be checked through the Diffuser Window, when required the bottle should be replaced.
•
Remove the Diffuser Cover from the product. [Fig. 16a]
Remove the Diffuser Unit & Bottle from the diffuser cover. [Fig. 16b]
•
•
Unscrew & remove the empty bottle and discard. [Fig. 16c]
Remove the new bottle of H-Essence or H-Biotics from the packaging and remove the cap. [Fig. 16d]
•
•
Tightly screw the new bottle on to the diffuser unit. [Fig. 16e]
•
Refit the diffuser unit into the diffuser cover. [Fig. 16f]
Refit the Diffuser cover into the H-Purifier. [Fig. 16g]
•
Fig.16
GB
11
11
11
Publicité
