One for All URC1919 Mode D'emploi

LEARNING
START:
Your One For All remote can learn any function from your original
(working) remote.
1
Place the original remote facing
the One For All remote on a flat
surface.
2
To learn:
Hold down GREEN + YELLOW until
the LED blinks twice
3
Press 975
The LED will blink twice.
4
Press the key on the One For All
remote you want to learn on, for
Example: the VOL + key
HOW TO DELETE A LEARNED FUNCTION
1. Hold down GREEN + YELLOW until the LED blinks twice.
2. PRESS 976.
3. Press the key to reset twice.
The LED flashes twice and the key will get back the original function
oshiba binnenwerk_Incl_WEEE.indd 5
LEARN A NEW FUNCTION TO YOUR REMOTE
2 - 5 CM
ENGLISH
5
Press the key on the Original
remote you want to learn, for
Example: the VOL + key of your
AUDIO Device
6
Two blinks: ok. Repeat from step 4
for any more keys to learn.
Long blink: try again from step 4.
7
When you have learned all the
keys you need, press and hold
the OK KEY for 3 seconds. The
LED will blink twice
FINISH
5
30-05-19 23:40