warmhaus Dallas DSF-1/0302 Instructions Importantes – Mode D'emploi page 4

Helpful Advice Before Installation

Please retain all packaging until all the parts and other package contents are accounted
for.

It is recommended to place your fireplace near an existing wall outlet for ease of electric
connection.

Store your fireplace in a dry, safe and dust-free place while drilling during fireplace
installation.

Do not attempt to wire new outlets or circuits. To reduce the risk of fire, electric shock or
injury to persons, always have a licensed electrician perform maintenance and repairs.
Instructions for Use
This fireplace can be operated with the switches located on the rear panel of the fireplace.

Plug the fireplace into a power outlet.

Switch "I" button ON to turn on the fireplace.

Adjust the dimming knob for the desired flame effect.

Turn the button ON for low heat.
II

Turn the II & III button ON for high heat.

Adjust the thermostat control knob to regulate the heat.
Auto Safety Shut-Off Mechanism

This fireplace is equipped with a safety shut-off feature which initiates if the fireplace
overheats (e.g. Due to blocked air vents). For safety reasons, the fireplace will NOT
automatically reset, and will need to be manually turned ON.

To restart the fireplace, unplug the fireplace from the power outlet for at least 15 minutes.
Next, reconnect to the power outlet and turn on the fireplace.
4