i-tec MySafe C31MYSAFEU315 Mode D'emploi page 6

i-tec MySafe USB-C 2.5" SATA External Case
Remark: We recommend that you save essential or valuable data on more than
one disks or other recording media.
NEW HDD FORMATTING
1. Click the right mouse button on „My Computer".
2. Select „Manage"
3. Click on „Disk Management"
4. Select HDD described as „Unallocated" with a specified capacity of the
inserted disk (usually, a number with a few digit values lower is being
displayed).
5. Click the right mouse button on the disk area and select „New Simple
Bunch", click on „Next".
6. Leave the bunch size on the maximum and click on „Next"
7. Select „Allocate a Letter to the Unit" and click on „Next".
8. Select „Format the Bunch with the Following Setting" (leave the initial
setting). Click on „Next" and „Finish".
9. HDD formatting will be performed. The formatting time depends on the
HDD size. Afterwards the HDD is visible in the system.
PACKAGE CONTENT
• Extern case for 2,5" HDD
• USB-C cable with a length of 45cm
• Screw-driver
• Screws
• Rubber legs
• User manual
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this product.
6 | ENGLISH