Duronic HV051 Manuel D'utilisation page 16

1. Before cleaning turn off the heater, unplug the power cord and allow the
heater to cool.
2. Do not immerse the power cord, plug or heater in water or other liquids, or
pour water or other liquids over the heater.
3. Use a vacuum cleaner to remove dust and lint from the metal grill of the
heater. Wipe the heater with a dry cloth to remove dust and a damp cloth (not
wet) to clean off stains.
4. Do not use detergents, abrasive cleaning products or any kind of polishing
material on the body of the heater as these can damage the finish.
1. Store the heater in a cool dry location, preferably covered to prevent dust
and dirt building up in the heater. Use old packaging to repack the unit.
2. Unplug the heater and store the mains lead in the storage tidy at the front of
the heater. Ensure that the plug does not trail.
Any other servicing should be performed by an authorized service
representative.
Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool
The heater must not be located
immediately below a socket-outlet.
Cleaning
Storage
Warning
16