Hewlett Packard StoreOnce 3100 System Manuel D'installation page 3

Step 5: Connect keyboard and monitor
Figure 4 Connecting the keyboard and monitor
1
1 Connect USB
keyboard cable
Step 6: Connect LAN port 1
Connect LAN port 1 to the network that will be used
to manage the StoreOnce System.
Figure 5 Connecting to LAN port 1
2
2 Connect VGA monitor
cable
Step 7: Connect the iLO port
(recommended)
Figure 6 Connecting to the iLO port
Step 8: Power up
1. Perform a final check to ensure all cables are
connected correctly and securely:
Power cable(s)
Keyboard and monitor cables
Network cable to LAN port 1
Network cable to iLO port
2. Power on the StoreOnce System (the power
button is on the front of the unit).
3. The Power button LED flashes green during
the power-on sequence, and the Power button,
System Health and NIC status LEDs all show
steady green when the StoreOnce System is
powering up.