Qtus DuetPro Mode D'emploi page 22

All manuals and user guides at all-guides.com
Care And Maintenance
Check your Qtus DuetPro regularly.
Regularly clean the Qtus DuetPro. Use a damp cloth and a
mild cleaning solution if necessary.
The swivel wheel holders and the front wheel axles get dirty.
Take the wheels off on a regular basis and clean them with
lukewarm water. Ensure that all parts are dried thoroughly and
oil the axles lightly with oil or silicone spray before replacing
the wheels.
Avoid exposing the Qtus DuetPro to extreme temperatures.
The Qtus DuetPro is not resistant to salt water. Never bleach,
dry-clean.
Fabrics used on the Qtus DuetPro are removable and
washable. Before washing always remove the fastenings,
foam, plastic or metal parts. Always refer to the washing label
on each part.
During wet weather always use the rain cover. If the Qtus
DuetPro is wet due to cleaning or rain do not fold but leave to
dry, opened out, in a well ventilated room.
Parts of the Qtus DuetPro can slightly discolour or become
worn as a result of weather conditions and usage. This can
also occur with normal usage.
The utmost care was exercised in designing and compiling
these instructions. The content however, is subject to change
without notice. Qtus shall not be liable for technical errors or
omissions contained in this manual.
The purchased product may differ from the product as
described in this manual. Check for the most recent manuals
on the Qtus website.
www.Qtus.eu
22