Publicité
Les langues disponibles
Les langues disponibles
SETTING BUZZER MELODIES
You can set 4 different melodies for both alarm 1 or 2. The buzzer
melodies are set at a fixed volume and cannot be adjusted.
1. Press and hold down the selected ALM 1 or 2 button and set
your alarm time using the ∞ or § controls.
2. Before releasing ALM 1 or 2 press the BUZZER button.
™ The display will show the buzzer icon
or ALM 2.
3. Hold down BUZZER and press ∞ or § repeatedly until you
find the desired melody.
– The buzzer melody and alarm number will be shown and
the buzzer melody played as long as you press BUZZER
4. To review your selected buzzer melody over the speakers,
press BUZZER.
SWITCHING OFF THE ALARM
There are three ways to switch off the alarm. Unless you cancel
the alarm completely, the 24 HR RESET will be automatically
selected after 59 minutes, from the time your alarm goes first off.
24 hours reset
If you want the alarm mode to be stopped immediately but also
wish to retain the same alarm setting for the following day:
1. Press 24 HR RESET
™ You will hear a long beep tone to confirm that the 24 HR
RESET has been activated.
/REPEAT ALARM
DAY
This will repeat your alarm call at 9 minutes intervals.
1. During the alarm call, press
™ After 9 minutes the alarm will call again.
2. You can press
/REPEAT ALARM again as often as
DAY
desired.
™ The icon of your selected alarm
the display will flash throughout the time when
/REPEAT ALARM is active.
DAY
All manuals and user guides at all-guides.com
under ALM 1
/REPEAT ALARM.
DAY
•
,
or
and ' : ' in
ALARM
13
Publicité
