Lorex U424AA Serie Guide De Démarrage Rapide page 12

All manuals and user guides at all-guides.com
5. Orient the camera fastener upwards, then align the
camera's mounting plate slots to the tabs in the
mounting bracket. Push in and slide down to secure
in place.
6. Insert the security screw through the fastener on the
top of the camera and mounting bracket, then tighten
with the screwdriver.
7. Tighten the pre-installed locking screw using the
screwdriver.
Note: To remove the battery pack in the future, loosen
the locking screw.
8. Adjust the camera to the desired position. Tighten the
adjustment ring clockwise.
Pre-installed locking screw