Shade-O-Matic Store a enrouleur Instructions D'installation page 2

INSTALLATION INSTRUCTIONS
2. Install the Shade
2a. Small Curved Cassette
1
Click
3
2
2b. Medium and Large Curved Cassette
3
1
2
2c. Square Cassette
1
2
3 4
2d. AgileLift
Important: Do not to pull the lock pin until shade is securely assembled onto the brackets.
Note: Illustration shown under Open Roll without top treatment, same concept applies with shade made with Cassette.
With the shade installed, remove the lock pin prior to operating by pulling it downward. If for any reason needs to make an adjustment on the position of the
installation brackets or remove the shade; raise the shade and insert the lock pin prior to disengaging the shade from the installation brackets.
2