Télécharger Imprimer la page

Fein Dustex II Mode D'emploi page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
3 41 01 045 06 9 - Buch Seite 13 Montag, 27. September 2004 11:00 11
Dustex II
Vacuuming dry material.
For dry vacuuming, insert the filter car-
tridge in the vacuum cleaner.
The paper dust bag should also be used
for dry vacuuming.
Cleaning and care.
!
Risk of injury
by switching the tool ON unintentionally.
Before cleaning, pull out the mains plug.
Empty the container after each application
(fluids, dirt, dust).
Empty the container after vacuuming flu-
ids. Afterwards, allow the vacuum cleaner
with the connected accessories (vacuum
hose, vacuum tube, nozzles, etc.) to con-
tinue running for a few minutes to dry
them.
Troubleshooting.
In the case of inadequate vacuuming performance, check the following:
Fault description
Vacuum cleaner cannot be
switched on.
Vacuuming performance is
reduced.
No vacuuming performance
for wet vacuuming.
Maintenance and repairs.
!
Risk of injury
Service, testing and repairs may only be car-
ried out by electrical engineers in conformity
with the regulations valid in the respective
country.
Maintenance and repairs.
We recommend our customer service
department (repair centre), FEIN author-
ised service centres and agencies.
Addresses can be found at the end of
these operating instructions and in the
enclosed safety instructions.
Please hand these operating instructions
to the repair centre. An overview of spare
parts can be found at the end of these
operating instructions.
Only use original FEIN spare parts.
Cause
The connection socket fuse
has actuated.
Vacuum cleaner is in
automatic mode.
Vacuum cleaner is not
correctly assembled.
Vacuum hose system is
clogged.
Paper dust bag is full.
Filter cartridge is clogged.
Container is full – float has
closed the vacuuming opening.
EN
Correcting the fault
Check that there is a
current supply.
Turn the mode selector
switch (2) to (M).
Place the top of the
vacuum cleaner on and
close the latches correctly.
Clean vacuum hose and
vacuum tubes.
Insert a new paper dust bag.
Clean or renew filter
cartridge.
Empty container.
13

Publicité

loading

Ce manuel est également adapté pour:

9 20 20