DNT MusicFly Notice D'utilisation page 13

Auto power off
If no audio signal is detected or no button is pressed mean-
while the MusicFly tunes automatically off after 1 minute.
Setup input level
Set the volume of the audio unit to a reasonable level to get the
best signal quality. The most optimum quality of sound can be
enjoyed at level
level to low, MusicFly to set to low gain
level to high , the MusicFly overmodulated
optimum level.
Vary the volume at the audio unit till the
in the display.
Storing frequencies
Select the desired frequency with UP-/Down button.
Press on/off-button shortly. The
Use UP-/Down button to select the desired memory
address (1-6).
Touching the on/off-button once, stores the selected fre-
quency at the selected memory address and takes the user
back to the main screen.
Select memory
Touch the on/off-button once.
Each following touch of the on/off-button changes the
memory address and recalls the stored frequency.
Setup MusicFly
Place the MusicFly nearby the radio or the antenna.
The quality of the reception in the car can differ.
It can be necessary to test different places in the
car to get the best result.
The best reception is obtained in the car if the
MusicFly operates with the enclosed cigarette
among the 3 levels:
- 13 -
Getting started
symbol is shown
symbol fl ashes.