TMI PU5005X1 Fonctionnement page 3

[ Standard measurement : e.g. 100m race ]
Press the buttons in the following order :
START
* Press button A to start the
chronograph. The
chronograph hands will start
moving.
* The chronograph can measure up to
and chronograph stops after a measurement for
* After the maximum measurement time finished, to restart the chronograph function :
VK63, VK67, VK68, VK73 : Press button A
VK83 : Press button B (to reset the chronograph minute hand to "0" position) then press button A
* During the chronograph operation, button B (reset) can be pushed. It will not cause any problem.
Operation Manual
VK63, VK67, VK68, VK83, VK73
HOW TO USE THE CHRONOGRAPH
A
STOP (Finish)
(6 hours 20 minutes 10 seconds)
* Press button A again to stop
the chronograph. The
chronograph hands stop to
indicate the elapsed time.
VK63, VK68, VK73 : 60 minutes
VK67: 12 hours
VK83 : 20 minutes
A B
* Press button B to reset the
chronograph. All the
chronograph hands will be
reset to "0" position.
VK63, VK68, VK73 : 60 minutes
VK67: 12 hours
VK83 : 20 minutes
RESET
English