Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY AND INSTALLATION INSTRUCTIONS:
No tools required for assembly and installation.
FOR FIRST TIME USE : Remove pull tab
between the top cover (1) and housing (5).
(Fig.1)
A.
Firmly slide post (6) into solar housing (5).
Attach the post (6) to stake (9). Push the
assembly firmly into the ground - DO NOT
use a hammer. For ground with hard soil, to
prevent breaking the stake (9), use trowel to
loosen soil first. (Fig.2)
B. Firmly twist shepherd's hook (7) into solar
housing. Attach the shepherd's hook (7) and
post (8) to stake (9). Push the assembly firmly
into the ground- DO NOT use a hammer. For
ground with hard soil, to prevent breaking the
stake (9), use trowel to loosen soil first. (Fig.3)
CHARGING THE BATTERY:
For optimum performance, it is best to install the solar lights in full sunlight and charge
for 10-12 hours. Allow the light to run at least 8-12 entire charging and discharging
cycles to reach battery's maximum capacity.
5
5
6
9
7
8
9
１
Fig.1
Fig.2
5
Fig.3
Page 4
Publicité
