Driver Installation - i-tec U3DUAL4KD Mode D'emploi

Double adaptateur
Table des Matières

Publicité

EN
USB 3.0 A/C Dual Display Port Adapter
ADAPTER DESCRIPTION
1. 2x Display Port Port – for connecting Display Port monitors
2. Integrated cable with USB 3.0 connector – for connecting the
adapter to laptop, tablet, PC or smartphone through USB-A port.
3. USB 3.0 to USB-C adapter – for connecting adapter to laptop, tablet,
PC or smartphone through USB-C or Thunderbolt 3 port.

DRIVER INSTALLATION

Do not connect the adapter to your laptop, PC, tablet or smartphone
before installing the drivers. Drivers need to be installed prior to first
use. Make sure that you have updated BIOS and newest drivers for
your device before the installation.
You can download drivers for the adapter from our website
www.i-tec.cz/en on the page for this product in the „Download" tab.
Then you just need to confirm automatic installation.
For Android, Chrome OS and Ubuntu use the drivers from the
DisplayLink chipset manufacturer. You can download them here:
http://www.displaylink.com/downloads or on our website
www.i-tec.cz/en on page for this product in the „Download" tab.
You can connect the adapter directly, when using Windows 10.
The drivers will be installed automatically from the system, when
connected to the internet.
CONNECTING DISPLAY PORT MONITOR
The adapter is equipped with 2x 4K@60Hz Display Port for
connecting one or two external monitors or a projector with Display
Port interface. Advanced plasma and LCD monitors and TVs can be
used as an imaging equipment. Graphics chip that is „ the heart" of
the adapter supports up to 5K (Ultra HD) resolution 5120x2880@60Hz
when using only one monitor (connected with two DP cables). Use
only high-quality Display Port cables for connecting the monitor to
the adapter. During the additional monitor installation, the screen of
the laptop Mac, tablet or PC can flicker, but this is normal.
6

Publicité

Table des Matières
loading

Table des Matières