Accessing This Unit Using The Web Browser - Sony IPELA SNT-V704 Manuel D'installation

To specify the DNS server
addresses manually:
Select Use the following DNS server
address, and type the Primary DNS
server address and Secondary DNS
address in each box.
Note
The Third DNS server address and
Fourth DNS server address are invalid
for this unit.
9
Set the HTTP port number.
Normally select 80 for the HTTP port
No. To use another port number, select
the text box and type a port number
between 1024 and 65535.
10
Type the Administrator name
and Administrator password.
The default settings of both items are
"admin."
Note
You cannot change the Administrator
name and Administrator password in this
step. To change these items, see "Setting
the User – User setting Page" of the User's
Guide stored in the supplied CD-ROM.
11
Confirm that all items are
correctly set, then click OK.
If "Setting OK" is displayed, the IP
address is correctly assigned.
Accessing this Unit Using the
Web Browser
When the IP address has been assigned to
this unit, check that you can actually access
the unit using the Web browser installed in
your computer.
This section explains how to access this unit
using the Internet Explorer.
For details on the operations using the Web
browser, i.e. for using a Web browser that is
not the Internet Explorer, see the User's
Guide stored in the supplied CD-ROM.
1
Start the Web browser on the
computer and type the IP
address of this unit in the URL
box.
Example:
The Welcome page is displayed.
2
Click ActiveX viewer.
The Main Viewer page is displayed and
the monitor image(s) from the camera(s)
appear(s) on the screen.
When you display the monitor image(s)
from the camera(s) for the first time, the
Security Warning appears. Click Yes
and install the ActiveX Control.
Assigning the IP Address to this Unit
17
GB