Assigning The Ip Address Using The Setup Program - Sony IPELA SNT-V704 Manuel D'installation

Assigning the IP Address
Using the Setup Program
1
Insert the supplied CD-ROM
disc into your CD-ROM drive.
2
Double-click the Setup folder in
the CD-ROM drive.
3
Double-click Setup.exe.
4
Install the IP Setup Program to
your computer following the
wizard displayed.
If the Software License Agreement is
displayed, read it carefully and accept
the agreement to continue the
installation.
5
Start the IP Setup Program.
The program detects the Video Network
Station SNT-V704(s) connected on the
local network and lists it (them) on the
Network tab window.
16
GB
Assigning the IP Address to this Unit
6
Click on the SNT-V704 you want
to assign a new IP address in
the list.
The network settings for the selected
SNT-V704 are displayed.
7
Set the IP address.
To obtain the IP address
automatically from a DHCP
server:
Select Obtain an IP address
automatically.
The IP address, Subnet mask and
Default gateway are assigned
automatically.
To specify the IP address
manually:
Select Use the following IP address,
and type the IP address, Subnet mask
and Default gateway in each box.
8
Set the primary DNS Server
address and, if necessary,
secondary DNS server address.
To obtain the DNS server
addresses automatically:
Select Obtain DNS server address
automatically.