Pioneer GM-D7400M Mode D'emploi page 5

LPF (Low-Pass-Filter) Cut Off Frequency Control
You can select a cut off frequency from 40 Hz to 240 Hz.
Power Indicator (Blue)
The power indicator lights when the power is switched on.
Input Switch
It is possible to input from a car stereo external output or a car stereo speaker output. Switch
the input switch before turning on the power. Since switching the input switch while the
power is on can cause a loud noise to be emitted from the speakers, the power is turned off
by a protection function. When using an external output, slide the switch to the right (RCA).
For connection instructions, see the "Connection Diagram" section. When using a speaker
output, slide the switch to the left (SP). In this case, it is necessary to use the supplied speak-
er input wire with RCA pin cord. For details, see the "Using the Speaker Input" section.
Bass Boost Control
You can select a bass boost level from 0 dB, 6 dB and 12 dB.
4