Publicité
Les langues disponibles
Les langues disponibles
installing your dryer
DRyER ExhAuST TIPS
Plastic or non-metal flexible duct presents a potential fire hazard.
WarninG
1. Make sure your dryer is installed properly so it exhausts air
easily.
2. Use a 4" diameter rigid metal duct. Tape all joints, including
at the dryer.
Never use lint-trapping screws.
3. Keep ducts as straight as possible.
4. Clean all old ducts before installing your new dryer.
Be sure the vent flap opens and closes freely.
Inspect and clean the exhaust system annually.
Don't let a poor exhaust system slow drying by:
1. Restricting your dryer with a poor exhaust system.
2. Using a plastic, thin foil, or non-metal flexible duct.
3. Unnecessarily using long ducts that have many
elbows.
4. Having crushed or clogged ducts and vent.
20_ installing your dryer
DV419AES-02656B_EN.indd 20
1
2
3
4
2010-06-04
1:42:19
Publicité
