Publicité
48
h
ACCLIMATISE IN THE AREA OF USE
Mount in a dry area
All manuals and user guides at all-guides.com
Use / instructions
> 1200 mm
EN
Please note! Read these instructions prior to assembly and use! Check for damage before assembly. Any damage
reported after assembly is not covered by the guarantee.
Solid oak
Our solid European oak, produced sustainably in accordance with European guidelines, gives a feeling of warmth in the
bathroom. The selected oak has grown over many years and has been able to absorb a lot of CO
. This growth means every
2
piece of wood is different. This can be seen from the material's structure and colouration. Please note that this can result in
differences between photos and samples.
A feature of wood is that it expands and contracts. Over time, slight warping and surface imperfections can occur. Functionally
this is not a problem, but from an aesthetic viewpoint it should be limited.
Oak maintenance
All our oak products are protected with LoooX Oak Protect. LoooX Oak Protect comprises a number of unique protective
coating layers that retain the matt look of our wood.
Regular maintenance keeps the oak in top condition. The LoooX Wood Maintenance Set (item no. WMS) was developed for
this. The maintenance product provides an additional water-repellent layer, making the oak easy to clean.
Oak advice
• keep oak clean and dry and do not allow any liquids to penetrate the wood;
• make sure that the room in which the oak is placed is well ventilated;
• never place the oak product in the immediate vicinity of a bath or shower without a fixed dividing wall;
• do not place any corrosive, aluminium or wet products directly onto the wood (shaving foam canisters, toothpaste, red wine
and similar);
• do not use aggressive cleaning agents or sharp/abrasive objects (scouring pad, steel wool and similar);
• all holes drilled into the furniture after delivery should be sealed with acid-free silicone sealant to prevent moisture penetration.
Brushed stainless steel parts (depending on model)
Stainless steel maintenance
Use the stainless steel treatment kit (item no. CLEAN570-580) for intensive cleaning of brushed stainless steel. This treatment
kit is available from the seller of our products.
Stainless steel advice
• keep clean and dry;
• do not use aggressive cleaning agents or sharp/abrasive objects (scouring pad, steel wool and similar);
• do not place any corrosive or aluminium products directly onto the stainless steel (shaving foam canister and similar).
Coloured parts (stainless steel powder coating, depending on model)
Maintenance of coloured parts (stainless steel powder coating)
Powder-coated stainless steel can be cleaned with a gentle all-purpose cleaner.
Coloured parts advice (stainless steel powder coating)
• keep clean and dry, the powder coating may separate if this recommendation is not followed;
• do not use aggressive cleaning agents or sharp/abrasive objects (scouring pad, steel wool and similar);
• do not place any corrosive or aluminium products directly onto the stainless steel (shaving foam canister and similar).
Mounting in the bathroom
The LoooX product should be mounted in a dry area in the bathroom. As a rule of thumb, you can maintain a distance of
1200 mm from the shower.
!
Do not use harsh cleaning solvents
Do not place corrosive, aluminium or
Leave clean and dry. Do not
and sharp / abrasive objects (scourers,
liquid objects, such as steel or aluminium
allow any liquid to penetrate
steel wool etc.)
(spray) cans, directly on the wood. This
into the wood.
may cause permanent stains.
3
Publicité
