Inateck FE2009 Manuel D'instructions page 2

English
Product introduction
FE2009 turns your mSATA SSD into a high speed portable
hard disk within seconds. Featuring outstanding USB3.0
transfer speeds and supporting UASP protocol, transmission
speed is even faster. The enclosure goes to sleep when
stops read/write data for 10 minutes, which saves power
and extends hard drive life.
Scheme image of the enclosure
Front
Bottom
LED USB3.0
1
How to use
a. Remove the two screws on the case with a provided
screwdriver.
b. Insert the SSD to mSATA slot, and then buckle it with the
clip on the end.
c. Put the ssd driver back into the case. Seal the case with
two screws.
d. Now the USB data cable may be connected
Specifications
Product name
Product type
Weight
Color
Supported drives interface
interface
Hot plug，plug&play
Licenses
Measurements
Supported OS
mSATA SSD Enclosure
Inateck FE2009
40g
black
M50 mSATA SSD (50*30*4mm)
(8+18PIN) mini PCIe mSATA
supported
CE，FCC
82x42x13mm
Windows 7/8/10；Mac9.0 or above
2