Cequent Performance Products 24941 Instructions D'installation page 6

5. Tighten all fasteners with torque wrench to
20 Lb.-Ft. (27 N*M)
Proper torque is needed to keep the hitch secure to the vehicle
when towing.
7. Reinstall taillights and wiring – reconnect the wiring and reinstall
the taillights using the original (4) phillips head screws, (2) per side.
©2016, 2017 Cequent™ Performance Products, Inc. -
Printed in Mexico
6. Trim fascia – measure, mark, and trim fascia as shown.
CENTERLINE OF BUMPER
3-1/4"
Figure 4
Bottom View of Bumper Fascia
Sheet 6 of 18 24941NP
NOTE: Fascia tabs are not centered
on vehicle. DO NOT measure from
C L
tabs to locate area to trim.
2-1/4"
4-14-17 Rev. B