Cleaning And Maintenance - Lea LE24100DP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

continually
wraps around
the shaft and
teimmer head
assembly
Line trimmer
stops and will
not start again

10. CLEANING AND MAINTENANCE

Your tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance, switch off and unplug the tool.
Regularly clean the ventilation slot in your tool using a soft brush or dry cloth.
Regularly clean the cutting line and spool using a soft brush or dry cloth.
Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard.
11. WARRANTY
This product is warranted for a 24-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is
the result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation,
excessive dust penetration, intentional damage (on purpose or by gross carelessness),
inappropriate usage (use for purposes for which the device is not suitable), incompetent
usage (e.g. not following the instructions given in the manual), inexpert assembly,
lightning strike, erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
level
Unit failed
Plug is damaged
14
down
Contact dealer to check
damage
Check the plug

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Yt6922-01

Table des Matières