LG LA62 Serie Manuel D'utilisation page 33

registering Magic remote
Control
It is necessary to 'pair' (register) the magic remote control
to your TV before it will work.
How to register the Magic remote Control
BACK HOME
1 To register automatically, turn the
TV on and press the Wheel(OK)
button. When registration is
completed, the completion
message appears on the screen.
P
2 If registration fails, turn the TV
off and back on, then press the
Wheel(OK) button to complete
registration.
MY APPS
How to re-register the Magic remote Control
1 Press and hold the BACK
BACK
SMArT buttons together for 5
seconds to reset, then register it
SMArT
by following "How to register the
Magic Remote Control" above.
2 To re-register the Magic Remote
Control, press and hold the
BACK button for 5 seconds
toward the TV. When registration
is completed, the completion
message appears on the screen.
How to use Magic remote
Control
1 If the pointer disappears, move
the Magic Remote Control
slightly to left or right. Then, it
will automatically appear on the
screen.
» If the pointer has not been used
for a certain period of time, it will
disappear.
2 You can move the pointer by
aiming the Pointer Receiver of the
Magic Remote Control at your TV
then move it left, right, up or down.
» If the pointer does not work
properly, leave the Magic
Remote Control for 10 seconds
then use it again.
All manuals and user guides at all-guides.com
MAGIC REMOTE CONTROL FUNCTIONS
1
2
and
Precautions to Take when using
the Magic remote Control
y Use the Magic Remote Control within the maximum
y A communication failure may occur due to nearby
y The Magic Remote Control may be damaged
y Take care not to bump into nearby furniture or
y Manufacturer and installer cannot provide service
y It is recommended that an Access Point (AP) be
11
-1 Brief Info Title Test...
More
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
Shows information about the current programme
and screen.
You can select More Menu.
communication distance (10 m). Using the Magic
Remote Control beyond this distance, or with an
object obstructing it, may cause a communication
failure.
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause
interference, as these use the same bandwidth (2.4
GHz) as the Magic Remote Control.
or may malfunction if it is dropped or receives a
heavy impact.
other people when using the Magic Remote
Control.
related to human safety as the applicable wireless
device has possibility of electric wave interference.
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic Remote
Control may not perform as expected due to
frequency interference.
31
Info.