Télécharger Imprimer la page

Philips AZ-2030 Mode D'emploi page 15

Masquer les pouces Voir aussi pour AZ-2030:

Publicité

Les langues disponibles

Les langues disponibles

CD PLAYER
CD player and CD handling
• If the CD player cannot read CDs correctly, use a commonly
available cleaning CD to clean the lens before taking the set to
repair. Other cleaning methods may destroy the lens.
• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature can cause
condensation to cloud over on the lens of your CD player. Playing
a CD is then not possible. Do not attempt to clean the lens but
leave the set in a warm environment until the moisture
evaporates.
• Always keep the CD compartment closed to avoid dust on the
lens.
• To take a CD out of its box, press the center spindle while lifting
the CD. Always pick up the CD by the edge and return the CD to
its box after use to avoid scratching and dust.
• To clean the CD, wipe in a straight line from the center towards
the edge using a soft, lint-free cloth. Do not use cleaning agents
as they may damage the disc.
• Never write on a CD or attach any stickers to it.
CASSETTE PLAYBACK
1. Select TAPE source.
™ The display shows
2. Press STOP•OPEN 9/ to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press PLAY 1 to start playback.
5. To interrupt playback, press PAUSE ;. To resume, press this key
again.
6. By pressing SEARCH 5 or 6 on the set, fast winding of the
tape is possible in both directions.
7. To stop the tape, press STOP•OPEN 9/.
– The keys are automatically released at the end of the tape,
except if PAUSE ; has been activated.
All manuals and user guides at all-guides.com
throughout tape operation.
AZ 2030-2035/17
CASSETTE RECORDER
X
15

Publicité

loading

Ce manuel est également adapté pour:

Az-2035