Hama 00053145 Mode D'emploi page 16

g Operating Instruction
For Windows Vista and 7 in the 64-bit version:
1. Insert the enclosed driver CD-ROM into your drive.
2. Have a USB memory stick or a newly formatted fl oppy disk
ready.
3. Insert the USB memory stick into a free USB port or insert
the formatted fl oppy disk. Copy all the contents of the
directory Treiber\Vista_7\64Bit\Floppy from the enclosed
driver CD-ROM onto the USB memory stick or the fl oppy
disk.
4. Once the copying process has been successfully completed,
begin installing your operating system, as described in these
instructions.
5. In order that the operating system can be installed on
the hard drive, you must install the required driver during
the Windows installation. In the Windows setup program,
when asked "Where do you want to install Windows?",
click on the option "Load driver".
6. Follow the instructions of the installation program and, if you
have not already done so, insert the USB memory stick in a
free USB port or insert the fl oppy disk and click → OK.
7. The Windows installation program searches the USB
memory stick or fl oppy disk for a suitable driver and within a
short time displays it (JMicron JMB36X Controller).
Click → Next.
8. Now set up the hard drive or RAID array as required. Then
continue following the instructions of the Windows setup
program until Windows installation is complete.
For Windows XP x64-bit version:
1. Insert the enclosed driver CD-ROM into your drive.
2. Have a newly formatted fl oppy disk ready.
3. Insert the fl oppy disk into your fl oppy disk drive and copy all
the contents of the directory Treiber\XP\64Bit\Floppy from
the enclosed driver CD-ROM onto the fl oppy disk.
All manuals and user guides at all-guides.com
4. Once the copying process has been successfully completed,
begin installing Windows XP.
5. During the Windows XP setup program, press F6 as soon as
the following message is displayed at the bottom of the
screen. "Press F6 if you need to install a third party SCSI or
RAID driver..."
6. Insert the previously created fl oppy disk with the driver into
your fl oppy-disk drive and press ENTER.
7. In the Windows setup screen, press the S key to load the
driver from the fl oppy disk.
8. Select the correct driver using the up and down arrow keys.
In our case, the correct driver is called "
(Windows XP/2003 x64) RAID/AHCI Driver for Jmicron
JMB36X Controller". Then press ENTER.
9. The driver has been loaded from the fl oppy disk. The
installed driver is displayed for verifi cation:
"(Windows XP/2003 x64) RAID/AHCI Driver for Jmicron
JMB36X Controller". Press ENTER to confi rm.
10. Then follow the instructions of the operating system in order
to complete the installation of Windows XP x64.
For Windows XP Home/Professional/Media Center 2005:
1. Insert the enclosed driver CD-ROM into your drive.
2. Have a newly formatted fl oppy disk ready.
3. Insert the fl oppy disk into your fl oppy disk drive and copy all
the contents of the directory Treiber\XP\32Bit\Floppy from
the enclosed driver CD-ROM onto the fl oppy disk.
4. Once the copying process has been successfully completed,
begin installing Windows XP.
5. During the Windows XP setup program, press F6 as soon as
the following message is displayed at the bottom of the
screen. "Press F6 if you need to install a third party SCSI or
RAID driver..."
6. Insert the previously created fl oppy disk with the driver into
your fl oppy-disk drive and press ENTER.
7. In the Windows setup screen, press the Z button to load the
driver from the fl oppy disk.
8. Select the correct driver using the up and down arrow keys.
In our case, the correct driver is called "(Windows XP/2003)
RAID/AHCI Driver for Jmicron JMB36X Controller". Then
press ENTER.
9. The driver has been loaded from the fl oppy disk. The
installed driver is displayed for verifi cation:
"(Windows XP/2003 x64) RAID/AHCI Driver for Jmicron
JMB36X Controller". Press ENTER to confi rm.
10. Then follow the instructions of the operating system in order
to complete the installation of Windows XP.
15