Acteck AUDIO J-9929 Instruction page 5

Operating instruction for J-9929 Speaker System
CONTROL BOX
(Front)
7.POWER
11.INPUT 1
14.INPUT 2(RR/RL) Jack
9.VOLUME 13.INPUT 2(CEN/SUB) Jack
12.INPUT 2(FL/FR) Jack
5.Rear right speaker
10. BASS
6.Subwoofer speaker
8. LED
2.Front right speaker
(1)Speaker Out
1.Front left speaker(FL.) : Accepts RCA (FL.) input plug from front left speaker.
2.Front right speaker(FR.) : Accepts RCA (FR.) input plug from front right speaker.
3.Center speaker(CEN.) : Accepts RCA (CEN.) input plug from Center speaker.
4.Rear left speaker (RL.) : Accepts RCA (RL) input plug from rear left speaker.
5.Rear right speaker (RR.) : Accepts RCA (RR) input plug from rear right speaker.
6.Subwoofer speaker (SUB) : Accepts RCA (SUB) input plug form Subwoofer
speaker.
7.POWER : Turns power on/off to the speakers system.
8.LED (Green) : Displays when speaker is receiving power. When LED display
"Green",Speaker is turned on, LED display "Red",Speaker system is stand By
mode.(When no Audio signal the system to be shunt down.)
9.VOLUME : Controls system volume level (Satellite and Subwoofer speakers).
10. BASS : Controls speaker's bass level (Subwoofer).
(2)Line In
11.INPUT 1 (DIN) : Connects (JS 9 Pin DIN) cable input plug from Dolby decoder
Box or support JS 9 Pin DIN output source . Note (1)
12.INPUT 2(FL/FR) Jack : Accepts 3.5mm stereo mini-plug from Dolby Decoder
Box or DVD player with AC-3 5.1 channel.
13.INPUT 2(CEN/SUB) Jack : Accepts 3.5mm stereo mini-plug from Dolby Decoder
Box or DVD player with AC-3 5.1 channel.
14.INPUT 2(RR/RL) Jack : Accepts 3.5mm stereo mini-plug from Dolby Decoder
Box or DVD player with AC-3 5.1 channel.
15.DC 15V : Power input jackadaptor DC 15V(3A)
Note (1) : For JS Specification 9 Pin to 3.5mm stereo mimi plug cable.
7
(English)
CONTROL BOX
(Back)
4.Rear left speaker
3.Center speaker
1.Front left speaker
15.DC 15V
Instruction for connecting the J-9929 Speaker
1.Plugs the satellite five speakers cables into the back of Control box's output jacks
(Item 1~6 ).
2.Plugs the 3.5mm stereo phone Jack or 9 pin DIN Jack input cable attached to the
back of the Control box's (Item 11~14 ).
3.Before connecting the power cable, make sure the Control box's power switch is
in the "off" or "out" position. Accepts input plug from DC power outlet (Item 7 ).
4.See fig (1) for Dolby digital speaker system includes 6 PCs speakers : front left,
front right, surround left, surround right, Center and subwoofer. Each speaker has
own one independent channel and correct place.
Specification
1-1.Subwoofer :
Output power : 20 W
Driver : 4" Woofer
Load Impedance 4 Ohms
Power supply : Input AC Power Adapter Source,Output DC15V/3A
Magnetically Shield : Yes
1-2.Satellite :
Output power : 30 W
Driver : Full Range 2.5" X 5
Load Impedance : 4 Ohms
2 Magnetically Shield : Yes
3.Total Power (R.M.S.) : 50 W
4.Frequency Response : 50 HZ ~ 20 kHz
5.Dimension (W x H x D) :
Subwoofer : 272 mm x 195 mm x 160 mm
Control box : 59 mm x 150 mm x 176 mm
Satellite : 83 mm x 80 mm x 95 mm
Package Contents
*Subwoofer
*Satellite Speaker x 5
*RCA Extension Cable (3M) x 2
*9 PIN to 3.5mm stereo plug x 3 cable
*User Manual
8