Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
H-9638, H-9639
H-10527, H-10528
LAB WORKBENCH
TOOLS NEEDED
Drill
Flathead
Drill Bit
1
2
CAUTION! Some parts may have sharp edges.
Care must be taken when handling various
pieces to avoid injury. For your safety, wear a
pair of work gloves when assembling.
ONLY USE BLUNT-END SCREWS TO ATTACH TABLETOP TO FRAME
PAGE 1 OF 2
1-800-295-5510
uline.com
13 mm Wrench
Flathead
Screwdriver
17 mm Wrench
4
3
CAUTION! Do not use pointed-end screws with steel frame packaging.
Pointed-end screws will protrude through tabletop if used.
PARTS
PARTS
#
DESCRIPTION
1
Leg
2
Adjustable Foot
3
Frame Support Bar
4
Phenolic Table Top
Tabletop
#28 1/4-20 x 1/2"
Blunt-end Wood Screw x 28
NOTE: Hardware packs are included in tabletop
and frame packaging. You may receive more
hardware than needed.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
60 AND 72" QTY.
2
4
2
1
Hardware Kits
Steel Frame
M10 Nut x 8
M8 x 65 Hex Bolt x 8
M10 x 65 Hex Bolt x 8
1122 IH-9638
Publicité
Manuels Connexes pour Uline H-9638
Sommaire des Matières pour Uline H-9638
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-9638, H-9639 1-800-295-5510 H-10527, H-10528 uline.com LAB WORKBENCH TOOLS NEEDED 13 mm Wrench Drill Flathead Flathead Screwdriver Drill Bit 17 mm Wrench PARTS PARTS DESCRIPTION 60 AND 72" QTY.
- Page 2 M8 x 65 hex bolts per leg using 13 mm wrench. (See Figure 2) Tabletop Figure 2 Frame Support Bars 3. Carefully set table upright and check all screws for tightness. M8 x 65 Hex Bolts 1-800-295-5510 uline.com PAGE 2 OF 2 1122 IH-9638...
- Page 3 H-9638, H-9639 800-295-5510 H-10527, H-10528 uline.mx MESA DE TRABAJO PARA LABORATORIOS HERRAMIENTAS NECESARIAS Desarmador Llave de 13 mm Taladro Broca Plana Plano Llave de 17 mm PARTES PARTES DESCRIPCIÓN CANT. PARA 60 Y 72" Pata Base Ajustable Barra de Soporte del Armazón Cubierta de Mesa Fenólica...
- Page 4 13 mm. (Vea Diagrama 2) Barras de Soporte Diagrama 2 3. Coloque con cuidado la mesa enderezada y revise para el Armazón la tensión de los tornillos. Pernos Hexagonales de M8 x 65 800-295-5510 uline.mx PAGE 4 OF 4 1122 IH-9638...
- Page 5 H-9638, H-9639 1-800-295-5510 H-10527, H-10528 uline.ca ÉTABLI DE LABORATOIRE OUTILS REQUIS Tournevis à tête Clé de 13 mm Perceuse Mèche de perceuse à plate Clé de 17 mm tête plate PIÈCES PIÈCES QTÉ POUR 60 ET DESCRIPTION 72 PO Pied Patte réglable...
- Page 6 Surface de table Figure 2 Barres de support de 3. Placez avec soin la table à l'endroit et vérifiez que cadre toutes les vis sont bien serrées. Boulons hexagonaux M8 x 65 1-800-295-5510 uline.ca PAGE 6 OF 6 1122 IH-9638...