1.
Use large Allen wrench and six large hex bolts to
attach vertical uprights to horizontal bars.
(See Figure 1)
2. Screw on casters. (See Figure 1)
Figure 1
PAGE 2 OF 6
ASSEMBLY
3. Align top hole of basket with top hole in vertical
upright. Screw in medium hex bolt and secure with
nut. Do not tighten nut all the way. Repeat for both
sides of baskets on all three baskets. (See Figure 2)
Figure 2
4. Position basket at desired angle and secure using
small hex bolt with nut.
5. Tighten all nuts securing baskets in place.
1-800-295-5510
uline.com
1021 IH-9697