Télécharger Imprimer la page

Beper 50.550 Mode D'emploi page 8

Nettoyant à vitre rechargeable

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Rechargeable window cleaner Use Instructions
Description of the product Fig.A
1. Scratch
2. Brush
3. ON / FF button
4. Spraying button
5. Indicator "in charge"
6. Charger socket
7. Cleaning mop
8. Charger
9. Spraying hole
10. Clean water tank cap
11. Clean water tank
12. Dirty water tank
13. Dirty water tank cap
14. Water measuring cup
Assembling and charging:
Insert the brush into the housing, the scratch part should be faced up.
Apply the cleaning mop over the scratch and press it slightly to make it fix well.
Insert the charger plug into the charger socket and plug the charger into the power outlet. The red light of the
charging indicator lights up. When the product is fully charged, the light will turn green. At this point disconnect
the charger from the power outlet and from the appliance.
Warning: Before charging the appliance, make sure it is not working.
Use
Open the cap of clean water tank (upper tank) and fill it with water while using the supplied water measuring cup
and take care not to let the water overflow. It is also possible to add window detergent to the water. It is recom-
mended to check that both caps are firmly closed while using the appliance.
Spray clean water on the glass by using the appropriate button.
Turn the appliance and hold it on the side of the tank, then clean the window with the cleaning mop previously
placed on the scratch.
Switch on the appliance with the ON / OFF button, turn the product back and hold from the handle and slide it
over the window from top to bottom.
When the dirty water tank (lower tank) is full, open the cap and empty it completely.
Be careful not to fill it over ¾.
At the end of each use, it is recommended to empty both tanks to avoid mold and bad smells formation.
Cleaning and maintenance
The clean mop can be washed in a washing machine at a maximum temperature of 40°C.
The rest of the product can be cleaned with a slightly moistened soft cloth.
Technical data
Power supply:
Input: 100-240V ~ 50 / 60Hz
Output: 5.5V -500mAh
Product:
Lithium battery 3.7V
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
All manuals and user guides at all-guides.com
8

Publicité

loading

Ce manuel est également adapté pour:

Clean&dry vetrolindo