Samsung HW-Q900T Manuel Complet page 27

08 CONNECTING A MOBILE DEVICE
Method 1. Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically
turns on.
Mobile device
The initial connection
• When connecting to a new Bluetooth device, make sure the device is within 1 m distance.
1. Press the PAIR button on the Soundbar remote control to enter the "BT PAIRING" mode.
(OR)
a. Press the
"BT" changes to "BT PAIRING" in a few seconds automatically or changes to "BT READY" if
there is a connect record.
b. When "BT READY" appears, press and hold the
the Soundbar for more than 5 seconds to display "BT PAIRING".
2. On your device, select "[AV] Samsung Soundbar Q900T" from the list that appears.
• When the Soundbar is connected to the Mobile device, [Mobile Device Name] → "BT" appears in
the top display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
• After you have connected the Soundbar to your mobile device the first time, use the "BT
READY" mode to reconnect.
If the device fails to connect
• If you have an existing Soundbar (e.g., "[AV] Samsung Soundbar Q900T") in the list of speakers
on the Mobile device, delete it.
• Repeat steps 1 and 2.
Top of the Soundbar
BT PAIRING
(Multi Function) button on the top panel and then select "BT".
(Mic On/Off) button on the top panel of
ENG - 27
5 Sec
OR